PART |
Description |
Maker |
HCPL-314J-XXXE HCPL-314J-500 HCPL-314J |
HCPL-314J · 0.4 Amp Output Current IGBT Gate Drive Optocoupler 0.4 Amp Output Current IGBT Gate Drive Optocoupler 0.4安培输出电流IGBT栅极驱动光电耦合
|
Agilent (Hewlett-Packard) HP[Agilent(Hewlett-Packard)] Electronic Theatre Controls, Inc.
|
HCPL3150 HCPL-3150 HCPL-3150060 HCPL-3150300 HCPL- |
0.5 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent (Hewlett-Packard) HP[Agilent(Hewlett-Packard)]
|
HCPL-0302 |
0.4 Amp Output Current IGBT Gate Drive Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
|
HCPL-3150 HCPL-315J |
0.5 Amp Output Current IGBT Gate Drive Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
|
HCPL3120 HCNW3120 |
2.0 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent (Hewlett-Packard)
|
HCPL-T251 |
HCPL-T251 · 0.4 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent (Hewlett-Packard)
|
ACPL-K342-060E ACPL-K342-000E ACPL-K342-560E ACPL- |
2.5 Amp Output Current IGBT Gate Drive Optocoupler with Active Miller Clamp, Rail-to-Rail Output Voltage and UVLO in Stretched SO8
|
AVAGO TECHNOLOGIES LIMI... AVAGO TECHNOLOGIES LIMITED
|
HCPL-J314 |
0.4 Amp Output Current IGBT Gate Drive Optocoupler(0.4 放大输出电流 IGBT门驱动光耦合 0.4安培输出电流IGBT栅极驱动光电耦合器(0.4放大输出电流IGBT的门驱动光耦合器)
|
Avago Technologies, Ltd.
|
ACPL-331J-500E |
1.5 Amp Output Current IGBT Gate Driver Optocoupler with Integrated (VCE) Desaturation Detection, UVLO, Fault Status Feedback and Active Miller Clamping
|
AVAGO TECHNOLOGIES LIMITED
|
LTC2751 LTC2751CUHF-12TRPBF |
Current Output 12-/14-/16-Bit SoftSpanTM DACs with Parallel I/O Current Output 12-Bit SoftSpan DACs with Parallel I/O; Package: QFN; No of Pins: 38; Temperature Range: 0°C to 70°C
|
Linear Technology LINEAR TECHNOLOGY CORP
|
MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ... The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ... The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ... The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc. MICROCHIP[Microchip Technology]
|